Silentknight EVS-VCM Uživatelský manuál stáhnout pdf

Document LS10067-001SK-E Rev A

ECN: 13-0146

EVS-VCM Voice Control Module

Installation Instructions

The EVS-VCM Voice Control Module is

contained within the Silent Knight EVS

Series panel enclosure. It provides a

supervised microphone for live

communication and an interface for the

Emergency Voice System.

Note: Installation and wiring of this device must be done in

accordance with NFPA 72 and local ordinances.

Compatibility

The EVS-VCM is compatible with the

IntelliKnight 5820XL-EVS. For programming

and addressing, refer to Installation manual

for 5820XL-EVS (PN LS10061-001SK-E).

Board Layout & Mounting

1. Open the cabinet door and the dead

front panel.

2. Remove AC power and disconnect the

backup batteries from the main control

panel.

Mount the EVS-VCM in the middle section

of the dead front on the six mounting studs.

See Figure 1.

Figure 1: Back View of EVS-VCM

Specifications

Standby Current: 60 mA

Alarm Current: 80 mA

Wiring to a FACP

See Figure 2 to properly wire the EVS-VCM

to the FACP SBUS.

Figure 2: Wiring the EVS-VCM to the FACP

SBUS Address

DIPs

Dead Front Panel

Mounting Holes

SBUS

VBUS

Audio

AUX

Input

AUX

Audio

Trigger

Supervised

Power

Limited

EVS-VCM

1 2

Shrnutí obsahu

Strany 1 - ECN: 13-0146

Document LS10067-001SK-E Rev AECN: 13-0146 EVS-VCM Voice Control Module Installation InstructionsThe EVS-VCM Voice Control Module is contained within

Strany 2 - Installing the Microphone

EVS-VCM Voice Control Module Installation Instructions2 Document LS10067-001SK-E Rev AInstalling the MicrophoneTo install the microphone:1. Clip the m

Komentáře k této Příručce

Žádné komentáře

Silentknight EVS-VCM Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Bezpečnost Silentknight EVS-VCM. SilentKnight EVS-VCM User Manual [en] [de] Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnost Silentknight EVS-VCM